Quick Connect

Product Information
Now available in two sizes. When using with our power supplies, choose the 2.5mm option. See bottom of page in the pull down menu to choose size.

This handy device makes it simple to connect our power supplies to wiper motors.

Before the Quick Connect, to hook up a power supply to a wiper motor required 5 steps.

Step 1) Snip off the end of the power cord (and effectively ruin power supply).
Step 2) Separate wires in cord of newly ruined power supply.
Step 3) Strip the wires.
Step 4) Cut open terminal housing on wiper motor to reach terminals.
Step 5) Solder wires of power supply to wiper motor.

The disadvantages of the above five steps:

• Ruining the power supply once the end was snipped off, reducing its usefulness in future applications
• Once the wires are soldered to the wiper motor, the power supply essentially becomes "tethered" to the motor. This means that anywhere the motor goes, so does the power supply, making prop breakdown cumbersome.
• The requirement of owning a soldering iron and the knowledge of using it.

• Power supply remains intact.
• Terminal housing on wiper motor does not need to be cut open.
• No soldering iron required.
• Power supply detaches from motor easily, simplifying prop breakdown.
• Quickly switch from high to low settings or vice versa on the wiper motor.
• Reversing the terminal connections reverses motor rotation.
• All three steps finished in seconds!

Price: $2.49

• Tell a Friend