Real-Time Programming All programming of outputs are done in real-time using the programming section on the picoBoo. Like all other BooBoxes you can create an elaborate scene by simply pushing some buttons. Trigger Input The picoBoos have one input which can be used with normally-open or normally-closed contacts, making it possible to work with nearly any type of trigger.

Terminal Block Outputs The picoBoo FI-103 has two 10 amp relay outputs brought out to a pluggable terminal block. Each of the outputs has both a normally-open and normally-closed contact, ensuring you will be able to control anything. Write-Protection Just like their bigger brothers, the picoBoos have a write protection mechanism that helps prevent accidental or unwanted program changes.

Programming

All programming of outputs and sounds are done directly on the picoBoo. To program the outputs, just press the record button and act out the scene with the two output buttons. Easily synchronize the outputs with sound, when you hit record your scare sound will begin playing, then simply synchronize the outputs with the sound manually as you hear it.

 

Specifications

Power Requirements	Voltage: 9-12 VDC Current: 250mA max
Recording Capacity	Animation: 2 minutes at 30 frames per second
Input	Normally open or closed trigger can be used Input triggers when connected to ground Connector also supplies 12 volts to sensor if required
Output	2 normally-open or closed relay contacts on a pluggable terminal block 10 Amps max per contact

Manual

In Stock